virtualbox ubuntu 10.04配置分辨率

Devices-> Install Guest Additions...

 

 

 

安装增强功能后，发现分辨率还是改不了

最后用这个xorg.conf搞定

sudo gedit /etc/X11/xorg.conf

代码:

    Section "Device"
    Identifier "VESA Framebuffer"
    Driver "vesa"
    #VideoRam 4096
    # Insert Clocks lines here if appropriate
    EndSection

    Section "Monitor"
    Identifier "My Monitor"
    HorizSync 31.5 - 150.0
    VertRefresh 75-85
    EndSection

    Section "Screen"
    Identifier "Screen 1"
    Device "VESA Framebuffer"
    Monitor "My Monitor"

    # If your card can handle it, a higher default color depth (like 24 or 32)
    # is highly recommended.

    # DefaultDepth 8
    # DefaultDepth 16
    DefaultDepth 24
    # DefaultDepth 32

    # "1024x768" is also a conservative usable default resolution. If you
    # have a better monitor, feel free to try resolutions such as
    # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
    # card/monitor can produce)

    Subsection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubsection

    EndSection

    Section "ServerLayout"

    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"

    EndSection