Openwrt trunk R31296, 内核3.2.14, 相当稳定的版本, 目前实验皆OK

6154阅读 0评论2012-11-26 qiushui_007
分类:LINUX

root@OpenWrt:/tmp# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00020000 00010000 "u-boot"
mtd1: 000d9880 00010000 "kernel"
mtd2: 006f6780 00010000 "rootfs"
mtd3: 004e0000 00010000 "rootfs_data"
mtd4: 00010000 00010000 "art"
mtd5: 007d0000 00010000 "firmware"

#只有核心
root@OpenWrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    5.5M    276.0K      5.2M   5% /
/dev/root                 1.5M      1.5M         0 100% /rom
tmpfs                    14.4M     76.0K     14.3M   1% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
root                     14.4M     48.0K     14.4M   0% /tmp/root
overlayfs:/tmp/root      14.4M     48.0K     14.4M   0% /tmp/root
/dev/mtdblock3            5.5M    276.0K      5.2M   5% /overlay
overlayfs:/overlay        5.5M    276.0K      5.2M   5% /

root@OpenWrt:~# uname -a
Linux OpenWrt 3.2.14 #1 Fri Nov 23 14:48:37 CST 2012 mips GNU/Linux
root@OpenWrt:~#

#安装了摄像头, mjpg-streamer, usb hid
root@OpenWrt:/tmp# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    4.9M    280.0K      4.6M   6% /
/dev/root                 2.3M      2.3M         0 100% /rom
tmpfs                    14.4M    224.0K     14.2M   2% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
root                     14.4M     60.0K     14.4M   0% /tmp/root
overlayfs:/tmp/root      14.4M     60.0K     14.4M   0% /tmp/root
/dev/mtdblock3            4.9M    280.0K      4.6M   6% /overlay
overlayfs:/overlay        4.9M    280.0K      4.6M   6% /

root@OpenWrt:/tmp# opkg list-installed
base-files - 106-r31296
base-files-network - 4
busybox - 1.19.4-1
crda - 1.1.2-1
dnsmasq - 2.59-3
dropbear - 2011.54-2
firewall - 2-49
hotplug2 - 1.0-beta-4
iptables - 1.4.10-4
iw - 3.3-1
kernel - 3.2.14-1-0610a28dc7b3795da094fa8a9ddeda30
kmod-ath - 3.2.14+2012-02-27-1
kmod-ath9k - 3.2.14+2012-02-27-1
kmod-ath9k-common - 3.2.14+2012-02-27-1
kmod-cfg80211 - 3.2.14+2012-02-27-1
kmod-crypto-aes - 3.2.14-1
kmod-crypto-arc4 - 3.2.14-1
kmod-crypto-core - 3.2.14-1
kmod-gpio-button-hotplug - 3.2.14-1
kmod-hid - 3.2.14-1
kmod-i2c-core - 3.2.14-1
kmod-input-core - 3.2.14-1
kmod-input-evdev - 3.2.14-1
kmod-ipt-conntrack - 3.2.14-1
kmod-ipt-core - 3.2.14-1
kmod-ipt-nat - 3.2.14-1
kmod-ipt-nathelper - 3.2.14-1
kmod-leds-gpio - 3.2.14-1
kmod-ledtrig-default-on - 3.2.14-1
kmod-ledtrig-netdev - 3.2.14-1
kmod-ledtrig-timer - 3.2.14-1
kmod-lib-crc-ccitt - 3.2.14-1
kmod-mac80211 - 3.2.14+2012-02-27-1
kmod-nls-base - 3.2.14-1
kmod-nls-utf8 - 3.2.14-1
kmod-ppp - 3.2.14-1
kmod-pppoe - 3.2.14-1
kmod-scsi-core - 3.2.14-1
kmod-usb-core - 3.2.14-1
kmod-usb-hid - 3.2.14-1
kmod-usb-ohci - 3.2.14-1
kmod-usb-storage - 3.2.14-1
kmod-usb-storage-extras - 3.2.14-1
kmod-usb-uhci - 3.2.14-1
kmod-usb2 - 3.2.14-1
kmod-video-core - 3.2.14-1
kmod-video-uvc - 3.2.14-1
kmod-wdt-ath79 - 3.2.14-1
libc - 0.9.33-106
libgcc - 4.6-linaro-106
libip4tc - 1.4.10-4
libiwinfo - 33
libiwinfo-lua - 33
libjpeg - 6b-1
liblua - 5.1.4-8
libnl-tiny - 0.1-3
libpthread - 0.9.33-106
librt - 0.9.33-106
libuci - 2012-03-28.1-1
libuci-lua - 2012-03-28.1-1
libxtables - 1.4.10-4
lua - 5.1.4-8
luci - trunk+svn8571-1
luci-app-firewall - trunk+svn8571-1
luci-i18n-english - trunk+svn8571-1
luci-lib-core - trunk+svn8571-1
luci-lib-ipkg - trunk+svn8571-1
luci-lib-lmo - trunk+svn8571-1
luci-lib-nixio - trunk+svn8571-1
luci-lib-sys - trunk+svn8571-1
luci-lib-web - trunk+svn8571-1
luci-mod-admin-core - trunk+svn8571-1
luci-mod-admin-full - trunk+svn8571-1
luci-proto-core - trunk+svn8571-1
luci-proto-ppp - trunk+svn8571-1
luci-sgi-cgi - trunk+svn8571-1
luci-theme-base - trunk+svn8571-1
luci-theme-openwrt - trunk+svn8571-1
mjpg-streamer - r148-4
mtd - 17
opkg - 618-2
ppp - 2.4.5-4
ppp-mod-pppoe - 2.4.5-4
swconfig - 10
uboot-envtools - 2011.06-4
uci - 2012-03-28.1-1
uhttpd - 31
wireless-tools - 29-4
wpad-mini - 20120326-1
root@OpenWrt:/tmp# 


#自用固件的启动信息U-Boot 1.1.4 (May  3 2012 - 22:04:42)


AP121 (ar9330) U-boot


DRAM:  64 MB
led turning on for 1s...
id read 0x100000ff
flash size 8388608, sector count = 128
Flash:  8 MB
Using default environment


In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup 
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup 
eth1 up
eth0, eth1
Autobooting in 3 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK


Starting kernel ...


[    0.000000] Linux version 3.2.14 (xxg@xxg-desktop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #3 Mon Dec 10 17:53:47 CST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61820k/65536k available (2046k kernel code, 3716k reserved, 387k data, 192k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is TP-LINK TL-WR703N v1
[    0.330000] bio: create slab at 0
[    0.340000] Switching to clocksource MIPS
[    0.350000] NET: Registered protocol family 2
[    0.350000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.350000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.360000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.360000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.370000] TCP reno registered
[    0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.380000] NET: Registered protocol family 1
[    0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.420000] msgmni has been set to 120
[    0.430000] io scheduler noop registered
[    0.430000] io scheduler deadline registered (default)
[    0.440000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.440000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.450000] console [ttyATH0] enabled, bootconsole disabled
[    0.450000] console [ttyATH0] enabled, bootconsole disabled
[    0.460000] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.470000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.470000] 5 tp-link partitions found on MTD device spi0.0
[    0.480000] Creating 5 MTD partitions on "spi0.0":
[    0.480000] 0x000000000000-0x000000020000 : "u-boot"
[    0.490000] 0x000000020000-0x0000000f985c : "kernel"
[    0.490000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.510000] 0x0000000f985c-0x0000007f0000 : "rootfs"
[    0.510000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.520000] mtd: partition "rootfs" set to be root filesystem
[    0.530000] mtd: partition "rootfs_data" created automatically, ofs=4B0000, len=340000 
[    0.530000] 0x0000004b0000-0x0000007f0000 : "rootfs_data"
[    0.540000] 0x0000007f0000-0x000000800000 : "art"
[    0.550000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.800000] ag71xx_mdio: probed
[    0.800000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    1.410000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.410000] TCP westwood registered
[    1.420000] NET: Registered protocol family 17
[    1.420000] 8021q: 802.1Q VLAN Support v1.8
[    1.430000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.440000] Freeing unused kernel memory: 192k freed
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[    7.100000] JFFS2 notice: (404) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 15 of xref (0 dead, 6 orphan) found.
[    7.920000] SCSI subsystem initialized
[    8.090000] usbcore: registered new interface driver usbfs
[    8.100000] usbcore: registered new interface driver hub
[    8.100000] usbcore: registered new device driver usb
[    8.500000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.500000] ath79-ehci ar933x-ehci: Atheros built-in EHCI controller
[    8.510000] ath79-ehci ar933x-ehci: new USB bus registered, assigned bus number 1
[    8.550000] ath79-ehci ar933x-ehci: irq 3, io mem 0x1b000000
[    8.570000] ath79-ehci ar933x-ehci: USB 2.0 started, EHCI 1.00
[    8.570000] hub 1-0:1.0: USB hub found
[    8.570000] hub 1-0:1.0: 1 port detected
[    8.710000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.830000] uhci_hcd: USB Universal Host Controller Interface driver
[    8.950000] Initializing USB Mass Storage driver...
[    8.960000] usbcore: registered new interface driver usb-storage
[    8.960000] USB Mass Storage support registered.
switching to jffs2
- init -


Please press Enter to activate this console. [   32.160000] Compat-wireless backport release: compat-wireless-2012-02-27-1-r31296
[   32.160000] Backport based on wireless-testing.git master-2012-02-27
[   32.290000] cfg80211: Calling CRDA to update world regulatory domain
[   32.840000] cfg80211: World regulatory domain updated:
[   32.840000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   32.850000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   32.860000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   32.860000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   32.870000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   32.880000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.410000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   33.420000] cfg80211: Calling CRDA for country: US
[   33.500000] cfg80211: Regulatory domain changed to country: US
[   33.510000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   33.510000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   33.520000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   33.530000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.540000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.540000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.550000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   33.690000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   34.190000] PPP generic driver version 2.4.2
[   34.350000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   34.580000] NET: Registered protocol family 24
[   34.720000] nf_conntrack version 0.5.0 (968 buckets, 3872 max)
[   35.220000] i2c /dev entries driver
[   35.380000] usbcore: registered new interface driver ums-alauda
[   35.400000] usbcore: registered new interface driver ums-cypress
[   35.420000] usbcore: registered new interface driver ums-datafab
[   35.440000] usbcore: registered new interface driver ums-freecom
[   35.460000] usbcore: registered new interface driver ums-isd200
[   35.480000] usbcore: registered new interface driver ums-jumpshot
[   35.500000] usbcore: registered new interface driver ums-karma
[   35.520000] usbcore: registered new interface driver ums-sddr09
[   35.540000] usbcore: registered new interface driver ums-sddr55
[   35.660000] usbcore: registered new interface driver ums-usbat
[   35.790000] Linux video capture interface: v2.00
[   35.980000] usbcore: registered new interface driver usbhid
[   35.990000] usbhid: USB HID core driver
[   36.040000] pwc: Unknown symbol vb2_queue_init (err 0)
[   36.050000] pwc: Unknown symbol vb2_streamoff (err 0)
[   36.050000] pwc: Unknown symbol vb2_queue_release (err 0)
[   36.060000] pwc: Unknown symbol vb2_poll (err 0)
[   36.060000] pwc: Unknown symbol vb2_dqbuf (err 0)
[   36.070000] pwc: Unknown symbol vb2_reqbufs (err 0)
[   36.070000] pwc: Unknown symbol vb2_streamon (err 0)
[   36.070000] pwc: Unknown symbol vb2_querybuf (err 0)
[   36.080000] pwc: Unknown symbol vb2_qbuf (err 0)
[   36.080000] pwc: Unknown symbol vb2_buffer_done (err 0)
[   36.090000] pwc: Unknown symbol vb2_plane_vaddr (err 0)
[   36.090000] pwc: Unknown symbol vb2_vmalloc_memops (err 0)
[   36.100000] pwc: Unknown symbol vb2_read (err 0)
[   36.100000] pwc: Unknown symbol vb2_mmap (err 0)
[   36.130000] usbcore: registered new interface driver uvcvideo
[   36.130000] USB Video Class driver (1.1.1)
[   38.810000] device wlan0 entered promiscuous mode
[   41.180000] device wlan0 left promiscuous mode
[   41.180000] br-lan: port 1(wlan0) entering disabled state
[   41.510000] device wlan0 entered promiscuous mode
[   59.230000] br-lan: port 1(wlan0) entering forwarding state
[   59.240000] br-lan: port 1(wlan0) entering forwarding state
[   74.280000] br-lan: port 1(wlan0) entering forwarding state


#2013-09-03:
root@OpenWrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    3.3M    300.0K      3.0M   9% /
/dev/root                 3.8M      3.8M         0 100% /rom
tmpfs                    30.3M    484.0K     29.8M   2% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/mtdblock3            3.3M    300.0K      3.0M   9% /overlay
overlayfs:/overlay        3.3M    300.0K      3.0M   9% /
/dev/sda1                 1.8G     27.6M      1.7G   2% /mnt/sda1

root@OpenWrt:~# opkg list-installed
base-files - 106-r31296
base-files-network - 4
blkid - 1.42-1
block-mount - 0.2.0-8
busybox - 1.19.4-1
crda - 1.1.2-1
curl - 7.23.1-1
ddns-scripts - 1.0.0-19
dnsmasq - 2.59-3
dropbear - 2011.54-2
firewall - 2-49
gpio - 1
hotplug2 - 1.0-beta-4
iptables - 1.4.10-4
iw - 3.3-1
kernel - 3.2.14-1-8a85c8d2a8f91116376fa545e16dc2bd
kmod-ath - 3.2.14+2012-02-27-1
kmod-ath9k - 3.2.14+2012-02-27-1
kmod-ath9k-common - 3.2.14+2012-02-27-1
kmod-cfg80211 - 3.2.14+2012-02-27-1
kmod-crypto-aes - 3.2.14-1
kmod-crypto-arc4 - 3.2.14-1
kmod-crypto-core - 3.2.14-1
kmod-fs-ext4 - 3.2.14-1
kmod-fs-ntfs - 3.2.14-1
kmod-gpio-button-hotplug - 3.2.14-1
kmod-hid - 3.2.14-1
kmod-i2c-core - 3.2.14-1
kmod-input-core - 3.2.14-1
kmod-input-evdev - 3.2.14-1
kmod-ipt-conntrack - 3.2.14-1
kmod-ipt-core - 3.2.14-1
kmod-ipt-nat - 3.2.14-1
kmod-ipt-nathelper - 3.2.14-1
kmod-leds-gpio - 3.2.14-1
kmod-ledtrig-default-on - 3.2.14-1
kmod-ledtrig-netdev - 3.2.14-1
kmod-ledtrig-timer - 3.2.14-1
kmod-lib-crc-ccitt - 3.2.14-1
kmod-lib-crc16 - 3.2.14-1
kmod-mac80211 - 3.2.14+2012-02-27-1
kmod-nls-base - 3.2.14-1
kmod-nls-utf8 - 3.2.14-1
kmod-ppp - 3.2.14-1
kmod-pppoe - 3.2.14-1
kmod-scsi-core - 3.2.14-1
kmod-usb-core - 3.2.14-1
kmod-usb-hid - 3.2.14-1
kmod-usb-ohci - 3.2.14-1
kmod-usb-serial - 3.2.14-1
kmod-usb-storage - 3.2.14-1
kmod-usb-storage-extras - 3.2.14-1
kmod-usb-uhci - 3.2.14-1
kmod-usb2 - 3.2.14-1
kmod-video-core - 3.2.14-1
kmod-video-uvc - 3.2.14-1
kmod-wdt-ath79 - 3.2.14-1
libblkid - 1.42-1
libc - 0.9.33-106
libcom_err - 1.42-1
libcurl - 7.23.1-1
libext2fs - 1.42-1
libgcc - 4.6-linaro-106
libip4tc - 1.4.10-4
libiwinfo - 39
libiwinfo-lua - 39
libjpeg - 6b-1
liblua - 5.1.5-1
libminiupnpc - 1.6-1
libnl-tiny - 0.1-3
libopenssl - 1.0.1-1
libpthread - 0.9.33-106
librt - 0.9.33-106
libuci - 2012-03-28.1-1
libuci-lua - 2012-03-28.1-1
libusb - 0.1.12-2
libuuid - 1.42-1
libxtables - 1.4.10-4
lua - 5.1.5-1
luasocket - 2.0.2-3
luci - trunk+svn8571-1
luci-app-ddns - trunk+svn8571-1
luci-app-firewall - trunk+svn8571-1
luci-i18n-english - trunk+svn8571-1
luci-lib-core - trunk+svn8571-1
luci-lib-ipkg - trunk+svn8571-1
luci-lib-lmo - trunk+svn8571-1
luci-lib-nixio - trunk+svn8571-1
luci-lib-sys - trunk+svn8571-1
luci-lib-web - trunk+svn8571-1
luci-mod-admin-core - trunk+svn8571-1
luci-mod-admin-full - trunk+svn8571-1
luci-proto-core - trunk+svn8571-1
luci-proto-ppp - trunk+svn8571-1
luci-sgi-cgi - trunk+svn8571-1
luci-theme-base - trunk+svn8571-1
luci-theme-openwrt - trunk+svn8571-1
miniupnpc - 1.6-1
mjpg-streamer - r148-4
mtd - 17
opkg - 618-2
ppp - 2.4.5-4
ppp-mod-pppoe - 2.4.5-4
samba36-server - 3.6.4-1
swap-utils - 2.13.0.1-4
swconfig - 10
uboot-envtools - 2011.06-4
uci - 2012-03-28.1-1
uhttpd - 31
wireless-tools - 29-4
wpad-mini - 20120326-1
zlib - 1.2.5-1

root@OpenWrt:~# 

自动挂载


网络摄像头, 测试总结 http://blog.chinaunix.net/uid-27194309-id-3869697.html


samba 参考这里 http://blog.chinaunix.net/uid-27194309-id-3875625.html


上一篇:openwrt 的 目录文件和目标文件
下一篇:51汇编读取TM卡的相关代码