今天在ettus网上下载此版本来进行升级uhd_003.004.003-release_Ubuntu-10.04-x86_64，结果升级后发现
./uhd_usrp_probe
linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.004.003-173-ga38e440b
-- Opening a USRP2/N-Series device...
Error: RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected FPGA compatibility number 10, but got 9:
The FPGA build is not compatible with the host code build.
Please run:
sudo "/usr/local/share/uhd/utils/uhd_images_downloader.py"
"/usr/local/share/uhd/utils/usrp_n2xx_net_burner.py" \
--fpga="/usr/local/share/uhd/images/usrp_n210_r4_fpga.bin" \
--fw="/usr/local/share/uhd/images/usrp_n210_fw.bin" \
--addr="192.168.10.3"
版本不匹配，我定你的肺，同一个文件下的fw和fpga印象竟然不匹配，为此我怀疑作者忘记改版本号了。接上一般本忘该了。于是乎升级回原来版本ok。还是用的gui升级...
另外有个新发现：
就是UHD
USRP 后面的提示的字符是可以识别到了而不是usrp not implemented
